J. T. Eaton LCX9000 User Manual download pdf (Page 71)

LCX9000 Liquid-Cooled Drives User Manual

MN04005001E

For more information visit: www.EatonElectrical.com 4-13

January 2007

Table 4-2: Installing the Control Unit Mounting Box (Continued)

Internal Connections

As a general rule, all internal electrical and communications connections are made at the

factory. However, if modules have to be moved, for example, and the connections therefore

removed, you will have to re-establish the connections between 1) the Power Unit ASIC and

the Driver Board(s) on the one hand and 2) the Power Unit ASIC and the Optical Cable

Adapter Board on the other.

Connections between Power Unit ASIC and Driver Boards

See the ﬁgures and tables on the following pages for the correct connection of internal

electrical and communications connections.

Note: The minimum optical cable bending radius is 1.97 inches (50 mm).

7. Connect the female end of the keypad

cable to keypad on the enclosure door.

8. Use a cable channel for the cable run.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 127 128

No comments

J. T. Eaton LCX9000 User Manual Page 71