J. T. Eaton LCX9000 User Manual download pdf (Page 79)

LCX9000 Liquid-Cooled Drives User Manual

MN04005001E

For more information visit: www.EatonElectrical.com 5-3

January 2007

Status LEDs (Green – Green – Red)

The status LEDs light up in connection with the READY, RUN and FAULT drive status

indicators.

Table 5-3: Status LEDs (Green – Green – Red)

Text Lines

The three text lines provide the users with information on their present location in the keypad

menu structure as well as with information related to the operation of the drive.

Table 5-4: Text Lines

Keypad Pushbuttons

The alphanumeric control keypad has nine pushbuttons that are used for controlling the

drive (and motor), setting parameters and monitoring values.

Figure 5-2: Keypad Pushbuttons

Indicator Description

Lights up with the AC power connected to the drive. Simultaneously, the

drive status indicator READY is lit up.

Lights up when the drive is running. Blinks when the STOP button has been

pushed and the drive is ramping down.

Lights up when unsafe operating conditions were encountered due to which

the drive was stopped (Fault Trip). Simultaneously, the drive status indicator

FAULT blinks on the display and the fault description can be seen, see

Page 5-11, Active faults.

Indicator Description

Location indicator: displays the symbol and number of the menu, parameter,

etc. Example: M2 = Menu 2 (Parameters); P2.1.3 = Acceleration time.

Description line: Displays the description of the menu, value or fault.

Value line: Displays the numerical and textual values of references,

parameters, etc. and the number of submenus available in each menu.

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 127 128

No comments

J. T. Eaton LCX9000 User Manual Page 79