J. T. Eaton LCX9000 User Manual download pdf (Page 10)

LCX9000 Liquid-Cooled Drives User Manual

viii

For more information visit:

www.EatonElectrical.com

MN04005001E

January 2007

Warnings, Cautions and Notices

Read this manual thoroughly and make sure you understand the procedures before you

attempt to install, set up, or operate this Cutler-Hammer

LCX9000 Drive from Eaton’s

electrical business.

Warnings

WARNING

Only a competent electrician may carry out the electrical

installation.

WARNING

The LCX9000 Liquid-Cooled drive is meant for ﬁxed installations only.

WARNING

Do not perform any measurements when the drive is connected to

the mains. Prior to measurements on the motor or the motor cable,

disconnect the motor cable from the drive.

WARNING

The drive has a capacitive leakage current.

WARNING

If the drive is used as a part of a machine, the machine

manufacturer is responsible for providing the machine with a main

switch (EN 60204-1).

WARNING

Only spare parts delivered by Eaton can be used.

WARNING

The motor starts at power-up if the start command is “ON”.

Furthermore, the I/O functionalities (including start inputs) may

change if parameters, applications or software are changed.

Disconnect, therefore, the motor if an unexpected start can cause

danger.

WARNING

The components of the power unit of the drive are

live

when it is

connected to mains potential.

Coming into contact with this

voltage is extremely dangerous and may cause death or severe

injury.

The control unit is isolated from the mains potential.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 127 128

Comments to this Manuals

No comments

J. T. Eaton LCX9000 User Manual Page 10

Comments to this Manuals