J. T. Eaton LCX9000 User Manual download pdf (Page 66)

LCX9000 Liquid-Cooled Drives User Manual

4-8 For more information visit: www.EatonElectrical.com

MN04005001E

January 2007

Digital Input Signal Inversions

The active signal level depends on which potential the common inputs CMA and CMB

(terminals 11 and 17) are connected to. The alternatives are either +24V or ground (0V). See

Figure 4-10.

The 24V control voltage and the ground for the digital inputs and the common inputs (CMA,

CMB) can be either internal or external.

Figure 4-10: Positive/Negative Logic



Positive logic (+24V) is the active signal) = the input is active when the switch is closed.



Negative logic (0V is the active signal = the input is active when the switch is closed.



Requires setting of jumper X3 to position “CMA/CMB isolated from ground.”

Jumper Selections on the OPT-A9 Basic Board

The user is able to customize the functions of the drive to better suit his needs by selecting

certain positions for the jumpers on the OPT-A9 board. The positions of the jumpers

determine the signal type of analogue and digital inputs.

On the A9 basic board, there are four jumper blocks X1, X2, X3 and X6 each containing eight

pins and two jumpers. The selectable positions of the jumpers are shown in Figure 4-12.

Figure 4-11: Jumper Blocks on OPT-A9

DIN1

24V

DIN2

DIN3

CMA

Ground

DIN1

Ground

DIN2

DIN3

24V

1 2 3

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 127 128

No comments

J. T. Eaton LCX9000 User Manual Page 66