J. T. Eaton LCX9000 User Manual download pdf (Page 95)

LCX9000 Liquid-Cooled Drives User Manual

MN04005001E

For more information visit: www.EatonElectrical.com 5-19

January 2007

Figure 5-14: Parameter Copy to Keypad

Download parameters to drive (From keypad, S6.3.3)

This function downloads one or all parameter groups uploaded to the keypad to a drive

provided that the drive is in STOP status.

Enter the From Keypad page (S6.3.2) from the Parameter Copy menu. Pressing the Menu

Button Right takes you to the edit mode. Use the Browser buttons to select either All

Parameters or Application Parameters and press the ENTER button. Wait until “OK” appears

on the display.

The procedure to download the parameters from keypad to drive is similar to that of from

drive to keypad. See Figure 5-14.

Automatic Parameter Backup (P6.3.4)

On this page you can activate or inactivate the parameter backup function. Enter the edit

mode by pressing Menu Button Right. Select Yes or No with the Browser buttons.

When the Parameter backup function is activated, the control keypad makes a copy of the

parameters of the presently used application. Every time a parameter is changed, the keypad

backup is automatically updated.

When applications are changed, you will be asked if you wish the parameters of the new

application to be uploaded to the keypad. If you want to do this, press the ENTER button. If

you wish to keep the copy of the parameters of the previously used application saved in the

keypad, press any other button. Now you will be able to download these parameters to the

drive following the instructions given in Copy Parameters on Page 5-18.

If you want the parameters of the new application to be automatically uploaded to the

keypad, you have to do this for the parameters of the new application once on page 6.3.2 as

instructed. Otherwise the panel will always ask for permission to upload the parameters.

Note: Parameters saved in the parameter settings on page S6.3.1 will be deleted when

applications are changed. If you want to transfer the parameters from one application

to another, you have to upload them ﬁrst to the keypad.

Up to keypad

Change Value

Up to keypad

All param.

Select

56.3.2

Up to keypad

56.3.2

Copy Parameters

Select

56.3

Up to keypad

Wait. . .

56.3.2

P1 P4

Confirm

Cancel

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 127 128

Comments to this Manuals

No comments

J. T. Eaton LCX9000 User Manual Page 95

Comments to this Manuals